6
Step 2
A).
Match Item 9 and Item 3 as shown in the figure, lead the bolt (Item 25) through Item 3 and
Item 9 and fix it on Item 3, and assemble the flat gasket (Item 31), then screw on the nylon nut
(Item 32), and insert Item 28 into the corresponding spacing hole;
B).
Insert Item 10 into Item 3 as shown in the figure, then fix Item 10 with the extension locking
knob (Item 21);
C).
Connect Item 5 to the right and left ends of Item 7 as shown in the figure and the other two
ends to Item 4 with the bolt (Item 27), and assemble the flat gasket (Item 31), then screw on
the nylon nut (Item 32)
D).
Connect Item 6 to the right and left ends of Item 4 and screw on the nylon nut (Item 32), then
connect Item 8 and Item 6 (both) with the bolt (Item 26); assemble the flat gasket (Item 31)
and screw on the nylon nut (Item 32), and place the other end of Item 8 on Item 4
E).
Tighten all bolts with the wrench after they are connected.
