5
Step 2
A). Match Item 9 and Item 3 as shown in the figure, lead the bolt (Item 25) through
Item 3 and Item 9 and fix it on Item 3, and assemble the flat gasket (Item 31),
then screw on the nylon nut (Item 32), and insert Item 28 into the corresponding
spacing hole;
B). Insert Item 10 into Item 3 as shown in the figure, then fix Item 10 with the
extension locking knob (Item 21);
C). Connect Item 5 to the right and left ends of Item 7 as shown in the figure and
the other two ends to Item 4 with the bolt (Item 27), and assemble the flat gasket
(Item 31), then screw on the nylon nut (Item 32)
D). Connect Item 6 to the right and left ends of Item 4 and screw on the nylon nut
(Item 32), then connect Item 8 and Item 6 (both) with the bolt (Item 26);
assemble the flat gasket (Item 31) and screw on the nylon nut (Item 32), and
place the other end of Item 8 on Item 4
E). Tighten all bolts with the wrench after they are connected.
