JML circulation enhancer, Инструкция по эксплуатации

Страница: 13 / 24

How to operate
For feet - BAND 1
In order to increase the conductivity we recommend that you dampen the soles
of your feet.
1. Place your bare feet onto ElectroVita (do not wear socks).
2. Press (and hold down for 3 seconds) the on/off button, the LCD screen will light up in blue.
The program will show 01 and both band shows 00, which means the device is in standby
mode. (See Figure 3).
3. Select the program you wish to use, there are 10 different programs which are indicated
on the LCD display. Select the program by pressing “P+” and “P-”. (See Figure 4).
Gently increase intensity setting by holding down the button “ ”. Or decrease intensity
setting by holding down the button “ ”. The intensity level is adjustable between 0 and 40.
(See Figure 7). In order to let the user feel the stimulation gradually increase the intensity to
a comfortable level by holding down the “
” intensity button. Those who suffer with poor
circulation may not feel anything until reaching a higher level of intensity. There are 40
output levels. When you reach your desired intensity level release the button, the icon will
blink. To stop the blinking and maintain the intensity press the “
” button 5 times.
4. You can adjust the program anytime. Once re-adjusted the intensity will return to “0”. So
you will have to increase the intensity to the desired level. The LCD will also show the level
which you have selected. (See Figure 5). To terminate the massage period, you can turn off
the unit anytime by pressing the on/off button for 3 seconds. The unit has an auto timer, it will
start to count down from 25 minutes of massage and switch off automatically.
BAND1
BAND2
PROGRAM
M i n
Fig 1 Fig 2 Fig 3
12