JML circulation enhancer, Инструкция по эксплуатации

Страница: 11 / 24

Foot Electro Therapy Massage
We will examine the operation in more detail later in your instructions but the principle is
relatively easy to understand. There are two separate controls/channels, one for the feet,
being band 1 and one for the pads being band 2. Place your feet on the foot plates, turn on
ElectroFlex with the central on/off switch (hold down for 3 seconds to activate), choose one
of the 10 different treatment programmes and start to increase the intensity to a comfortable
level. There are 40 different levels. When you start to feel the mild electro-therapy will depend
on your own nerve sensitivity. Certain individuals will feel nothing until the intensity is up at a
high level, others will feel the stimulation at relatively low levels. This is completely normal.
Body Toning
If you choose to tone muscle groups or target pain in other areas of your body the
ElectroFlex comes with four gel pads. These can be used to tone arms, hips, thighs, abs or
buttocks or target neck muscle or back pain.
The Outputs have no DC Component
Output Waveform
Circulation Enhancer output wave forms
10
BAND 1 SOLE MASSAGER (during 1 kΩ load)
MODE OUTPUT
1 Pulse rate 6Hz with 1 second in left side , right
side o time 1 second then Pulse rate 6Hz with
1 second in right side , left side o time 1
second. A cycle repeating.
2 Pulse rate 12Hz- 80Hz with 12 seconds and o
time in 1 sec. A cycle repeating.
3 Pulse rate 7Hz with 30 seconds and o time in
1 sec. A cycle repeating.
4 Pulse rate 7Hz- 25Hz with 8 seconds and o
time in 1 sec. A cycle repeating.
5 Pulse rate 12Hz- 80Hz with 11 seconds and o
time in 1 sec. A cycle repeating.
6 Pulse rate 12Hz with 12 seconds and o time in
1 sec. A cycle repeating.
7 Pulse rate 11Hz- 80Hz with 15 seconds and o
time in 1 sec. A cycle repeating.
8 Pulse rate 12Hz with 10 seconds and o time in
1 sec. A cycle repeating.
9 Pulse rate 12Hz with 13 seconds and o time in
1 sec. A cycle repeating.
10 Pulse rate 12Hz- 80Hz with 10 seconds and o
time in 1 sec. A cycle repeating.
BAND 2 BODY MASSAGER (during 1 kΩ load)
MODE OUTPUT
1 Pulse rate 13Hz- 80Hz with 13 seconds and o
time in 1 sec. A cycle repeating.
2 Pulse rate 13Hz- 80Hz with 18 seconds and o
time in 1 sec. A cycle repeating.
3 Pulse rate 13Hz- 80Hz with 19 seconds and o
time in 1 sec. A cycle repeating.
4 Pulse rate 13Hz- 80Hz with 7 seconds and o
time in 1 sec. A cycle repeating.
5 Pulse rate 13Hz- 80Hz with 16 seconds and o
time in 1 sec. A cycle repeating.
6 Pulse rate 13Hz- 80Hz with 10 seconds and o
time in 1 sec. A cycle repeating.
7 Pulse rate 13Hz- 80Hz with 17.6 seconds and
o time in 1 sec. A cycle repeating.
8 Pulse rate 12Hz with 10 seconds and o time in
1 sec. A cycle repeating.
9 Pulse rate 12Hz with 16 seconds and o time in
1 sec. A cycle repeating.
10 Pulse rate 12Hz- 80Hz with 11 seconds and o
time in 1 sec. A cycle repeating.