JML BLAST VAC PRO, Руководство пользователя

Страница: 11 / 16

TA
KE
OF
F
PUT
IN
Using your blower
continued
Installing the blower port
Unclip the back filter cover by pressing the
button on top and pulling off (Fig.1).
Replace with the blower port by pressing the
button on top and slotting in to place (Fig.2).
Short hose
Once the blower port is installed, locate the
large D-shaped plug on the hose and slot
into the blower port (Fig.3).
Short hose + attachment
Once the blower port is installed, locate the
large D-shaped plug on the hose and slot
into the blower port (Fig.3).
You will need to replace the small D-shaped
plug with the connection plug before you
can add a blower attachment to the hose.
Do this by grabbing the end of the hose with
one hand (not the hose itself) and the small
D-shaped plug with the other. Twist and pull
the plug until it comes loose (Fig.4). Take the
(Please refer to blower combination
diagrams on page 5).
Fig. 3
Fig. 1
Fig. 2
Fig. 4
Fig. 5
11