10
2.Remove four screws
（
picture 2
）
,open the light body cover,take the fan bracket and pull out
the connection line of the bulb.
（
picture 3
）
.
(picture 2 ) (picture 3)
)
3.Unscrew the two screws of the stainless steel plate support.(picture 4
）
,open the stainless
steel sheet support with one hand to the right.
（
picture 5
）
.
(picture 4)
(picture 5)
4
、
The other hand pulled the bulb from the stainless steel tab 15 degrees.
（
picture 6
）
,Pull out the
power line of the bulb.
（
picture 7
）
.
(picture 6)
(picture 7)
5..Install the lamp after replaced.
9. CONTROL PANEL
9.1
Introduction of control panel
Touch screen display
：
Display the data information and control operation;
Control wheel: can turn right,left and enter;
Turn left: Data increasing, scroll menu;
Turn right: Data diminishing, scroll menu;
Enter: OK
CONTROL
WHEEL
TOUCH
SCREEN
DISPLAY
e 1
）
