SECTION 4 - BOOM & PLATFORM
3121774
4-9
CAUTION
WHEN THE SKYGUARD IS PUSHED WITH EXCESSIVE FORCE THE SEN-
SOR SUPPORTS (ITEM 10 - FIGURE 4-13.) WILL BREAK. REPLACE WITH
NEW SENSOR SUPPORTS BEFORE CONTINUING OPERATION OF THE
MACHINE.
11.
POWER ON the machine.
•
Press button 6 (service) on the remote control
•
Press button 7 (set up)
•
Press button 5 (password)
•
Enter password “4 7 7 1" then press button 9 (OK)
•
Press button 3 (extra)
•
Press button 1 (optional)
•
Press button 8 (next)
•
Press button 4 (SkyGuard)
•
Press Button 1 (ON)
Figure 4-16. Asterisk must show next to the ON position
•
Press button 9 (esc)
•
Press button 9 (esc)
•
Press button 9 (esc)
•
Press button 9 (esc)
•
Remote control screen should be on main icon page
12.
Check for the proper functioning of SkyGuard
system.
NOTICE
IF PLATFORM REMOVAL WILL BE NECESSARY, SKY GUARD EXTERNAL
CONNECTOR HAS TO BE DISCONNECTED. THEN RECONNECTED WHEN
THE PLATFORM IS INSTALLED ON THE MACHINE.
NOTE:
If further information is required, please contact the
JLG Service Department.
SKYGUARD
1 – ON
*
2 - OFF
9 ESC
Go to
Discount-Equipment.com
to
order your
parts
