SECTION 6 - JLG CONTROL SYSTEM
6-14
3121774
Working Hours Menu
This page indicates the machine working hours displaying
engine working hours and electric motor working hours.
On Lithium machines have to be considered only the elec-
tric motor hours.
For both models “KEY” indicates the hours with main key
switched ON.
Press button 6 “W.HOURS”.
Working hours to reset/modify:
1.
Press button 7 “SETUP”.
2.
Press button 5 “PASSWORD”.
Using the remote control buttons to enter the
password 7385.
NOTE:
Passwords allow changing the Working Hours of
Engine and Electrical Motor.
Once the correct password is accepted the dis-
play showed “OK”.
3.
Press button 9 “ESC” two times.
NOTE:
Repeat the above steps if “NO” appear on the dis-
play.
4.
Press button 6"W:HOURS”.
KEEPING PRESSED the button 6 use the button1
“T+” to increase and button 2 “T-” to decrease
the working hours of the ENGINE.
KEEPING PRESSED the button 6 use the button 7
“E+” to increase and button 8 “E-” to decrease
the working hours of the Electric Motor.
KEEPING PRESSED the button 6 and then button
3 to set zero the working hours of Engine and
Motor.
5.
Press button 9 ESC 3 times to escape.
On Lithium models the Engine working HOURS will stay
always 0.
The procedure to view or change the working Hours of the
electrical motor are the same as per double powered
models.
Joystick Menu
By this page it's possible to verify the proper functioning
of the joysticks, once selected one joystick by buttons n.1
and n.2, joystick enumeration is indicated here below, the
display will show its position, expressed in step from 0
(rest position) to 127 (joystick fully pressed up or down).
Moving the selected joystick it's so possible to check its
proportionality and its end of the stroke (about 127 steps)
both forward and backward.
Go
to
Discount-Equipment.com
to
order
your
parts
