manualshive.com logo in svg

JLG 1500SJ, Руководство по эксплуатации и безопасности, Страница: 80 / 214

Поделиться
Скачать
JLG 1500SJ Скачать руководство пользователя страница 80

SECTION 4 - MACHINE OPERATION

4-12

– JLG Lift –

3121261

Traveling Forward and Reverse

1.

At Platform Controls, pull out Emergency Stop 
switch, start engine, and activate footswitch.

2.

Position Drive controller to Forward or Reverse 
as desired.

This machine is equipped with a Drive Orientation Indicator. The
yellow light on the platform control console indicates that the
boom is swung beyond the rear drive tires and the machine may
Drive/Steer in the opposite direction from the movement of the
controls. If the indicator is illuminated, operate the Drive function
in the following manner:

1.

Match the black and 
white direction arrows 
on both platform con-
trol panel and the chas-
sis to determine the 
direction the machine 
will travel.

2.

Push and release the Drive Orientation Over-
ride switch. Within 3 seconds, slowly move the 
Drive control toward the arrow matching the 
intended direction of machine travel. The indi-
cator light will flash during the 3 second inter-
val until the drive function is selected.

Содержание 1500SJ























































































































































































































Отзывы:

Нет отзывов