JLG 1500SJ, Руководство по эксплуатации и безопасности

Страница: 71 / 214

SECTION 4 - MACHINE OPERATION
3121261 – JLG Lift – 4-3
Envelope Tracking
When the platform approaches the edges of the operating enve-
lope all machine functions are slowed down except jib and plat-
form functions, telescope in or out at the rearward edge and
telescope in or out on the forward edge are slowed down auto-
matically by the boom control system to reduce machine
motions.
NOTE: Boom Control System in Automatic Mode: When the boom is
completely elevated along the edge of the backward stability
region and the telescope in function is activated, lift down will
automatically function until the boom is away from the edge of
the backward stability region.
Boom Control System in Manual Mode: The boom will stop when
the end of the envelope is reached and the operator must acti-
vate lift and/or telescope in the proper direction to bring the
boom back into the envelope.
Controlled Angle
The control system automatically maintains a constant elevated
boom angle when swinging the turntable. If the boom angle is at
30 degrees and swing only is activated the control system shall
add lift to maintain the relative boom angle at 30 degrees.
Swing Speed Proportioning
The Boom Control System sensors sense the distance the plat-
form is extended from the turntable, allowing higher swing
speeds with the boom retracted and gradually slower swing
speeds as the boom is extended.
BUFFER LINE
ENVELOPE
SLOWDOWN LINE
BUFFER
ZONE
SLOWDOWN
ZONE