JLG 1500SJ Скачать руководство пользователя страница 178

Страница: 178 / 214

SECTION 7 - ACCESSORIES

7-12

– JLG Lift –

3121261

Safety Precautions

DO NOT OVERLOAD PLATFORM.

DE-RATE THE PLATFORM BY 70 LBS (32 KG) WHEN WELDER IS IN THE PLATFORM.

• Check for cracked welds and damage to welder supports.

• Check for proper and secure installation of welder and

bracket.

• Ensure no personnel are beneath platform.

• Do not exit platform over rails or stand on rails.

• Use this option only on approved models.

• Keep lanyard attached at all times.

• Ensure correct polarity of leads.

• Wear proper welding apparel.

• Use correct rod size and current settings.

• Do not use electrical cords without ground.

• Do not use electrical tools in water.

• Do not weld to the platform.

• Do not ground through the platform.

• Do not use a high frequency arc starter with TIG welder.

Preparation and Inspection

• Connect ground clamp to metal being welded.

• Ensure there is a good ground connection and observe

proper polarity.

Operation

Start the engine, turn on the generator, then turn on the welder.

See the Miller Welder Owner’s Manual (PN 3128957) for more
information.

Содержание 1500SJ























































































































































































































Результаты поиска

Содержание 1500SJ

Отзывы:

Похожие инструкции для 1500SJ

Бренды по названию

Популярные бренды

JLG 1500SJ, Руководство по эксплуатации и безопасности

Результаты поиска

Содержание 1500SJ

Отзывы:

Похожие инструкции для 1500SJ

Бренды по названию

Популярные бренды