MCS-Panner Information
JL Cooper’s MCS-Panner features a high quality joystick mechanism, with
function switches and LEDs. It is used 2 ways:
1.
As a self-contained stand alone controller or
2.
Connected to a JL Cooper MCS-3000 Series Controller (3800, 3400,
or 3000)
1.
To operate the MCS-Panner as a self-contained controller, you will also
need the optional
MCS-PAN-MIDIKIT
. The MCS-PAN-MIDIKIT consists
of a special cable to provide MIDI IN an OUT, a power supply, and
operation notes relating to specific digital mixers. Refer to the MCS-Panner
Operation Notes included with the MCS-PAN-MIDIKIT for the proper DIP
switch settings.
2.
You may physically join the MCS-Panner to another MCS-3000 series
controller using the optional
MCS-Joiner
.
To connect the MCS-Panner to another JL Cooper MCS-3000 Series
Controller, use the modular cable included with the MCS-Panner. Be sure to
make all connections with the power off.
No external Power supply is required when connecting the MCS-Panner
to a MCS-3000 Series Controller
. The MCS-Panner obtains its power from
the MCS-3000 Series Controller and data to and from the MCS-Panner is
passed through the MCS-3000 Series Controller.
On the rear of the MCS-Panner is a four position DIP switch which selects
the Panner’s device ID number. The switch should be set when power is
disconnected from the Panner. Notice that the switches are numbered so that
the ON position is toward the bottom of the Panner.
To connect a single panner to another MCS-3000 series Controller, all
four switches should be OFF (UP).
