background image

SB-F-SUPRCNSL2/8W7_INSTR_SKU#011249

SB-F-SUPRCNSL2/8W7_INSTR_SKU#011249

C O N G R A T U L A T I O N S

You have completed the installation for this model!

Please refer to the Power Recommendation section for an 
amplifier recommendation and basic set-up help.

S T E P   3 6

Secure the lid of the factory console, from 

STEP 2

.

S T E P   3 5

Secure the rear panel of the factory console, from 

STEP 4

.

S T E P   3 4

Secure the front panel of the factory console, from 

STEP 3

Page 6 • JL Audio, Inc 2007

All specifications are subject to change without notice. “JL Audio®” and the JL Audio logo, “Stealthbox” and the Stealthbox logo are registered 
trademarks of JL Audio, Inc. “Ahead of the Curve” and its respective logo is a trademark of JL Audio, Inc. 

JLA-SKU#011249  -10-26-200

JLA-SKU#011249 -10-26-2007

7

  •  Printed in USA  •  ©2007 JL Audio, Inc.  •  U.S. PATENTS:  #5,734,734  #5,949,898  #6,118,884  #6,229,902  

#6,243,479  #6,294,959  #6,501,844  #6,496,590  #6,441,685  #5,687,247  #6,219,431  #6,625,292  #D472,891  #D480,709  Other U.S. & Foreign 
patents pending. For more detailed information please visit us online at

 www.jlaudio.com.

(954) 443-1100

w w w . j l a u d i o . c o m

1 0 3 6 9   N O R T H   C O M M E R C E   P A R K W A Y     •     M I R A M A R ,   F L O R I D A     •     3 3 0 2 5     •     U S A

I N C L U D E D   H A R D W A R E

(3)

(3)

 3/8-inch x 1-inch Hex Tap Bolt   

 3/8-inch x 1-inch Hex Tap Bolt   

(3)

(3)

 1/4-inch USS Flat Washer

 1/4-inch USS Flat Washer

(1)

(1)

 A-bracket 

 

 

 A-bracket 

 

 

(3)

(3)

 3/8-inch Split Lock Washer

 3/8-inch Split Lock Washer

(2)

(2)

 L-bracket 

 

 

 L-bracket 

 

 

(3)

(3)

 3/8-inch Flat Washer

 3/8-inch Flat Washer

(1)

(1)

 Plate Bracket 

 

 

 Plate Bracket 

 

 

(3)

(3)

 1/4-inch Lock Washer

 1/4-inch Lock Washer

(3)

(3)

 1/4-inch 20 x 1-inch Bolt 

 

 1/4-inch 20 x 1-inch Bolt 

 

(3)

(3)

 1/4-inch -20 Hex Nut

 1/4-inch -20 Hex Nut

(2)

(2)

 6-inch x 12-inch x 3/4-inch Foam

 6-inch x 12-inch x 3/4-inch Foam

S P E C I F I C A T I O N S

Enclosure Type:

  Acoustic Suspension (sealed)

Acoustic Suspension (sealed)

Driver Type:

 8W7-3

8W7-3

Nominal Impedance:

 3 ohms mono

3 ohms mono

Continuous Power Handling:

 

300 Watts

300 Watts

P O W E R   R E C O M M E N D A T I O N

P O W E R   R E C O M M E N D A T I O N

JL Audio recommends using a high quality amplifier such as the JL Audio 250/1v2.  
The diagram below shows the recommended crossover, infrasonic filter and equalizer settings for the 250/1 when 
being used to power your Stealthbox

®

.

The JL Audio 250/1v2 is a very versatile audio component.  Please consult the owner’s manual for even more 
detailed information about installing and tuning this amplifier.

M I D / H I G H   F R E Q U E N C Y   D R I V E R   F I T M E N T

A variety of JL Audio coaxial and component systems will fit in the factory speaker locations of you vehicle.

Front Speaker Size / Location:

 5-inch x 7-inch/ Front Doors

5-inch x 7-inch/ Front Doors

Fits JL Audio Models:

 TR570-CXi, C5-570, C5-570x & ZR570-CSi

TR570-CXi, C5-570, C5-570x & ZR570-CSi

Rear Speaker Size / Location:

 5-inch x 7-inch/ Rear Door

5-inch x 7-inch/ Rear Door

Fits JL Audio Models:

 TR570-CXi, C5-570, C5-570x & ZR570-CSi 

TR570-CXi, C5-570, C5-570x & ZR570-CSi 

Содержание Stealthbox SB-F-SUPRCNSL/8W7







Отзывы: