background image

6

RESISTANCE ADJUSTMENT:

Pedalling resistance is controlled by the tension knob located under the handlebar. To 

increase resistance, turn the tension knob clockwise. To decrease resistance, turn the 

tension knob counter clockwise.

SPECIAL NOTICE:

Every time before riding, make sure both pedals are securely tightened.

After finishing riding, use a dry rag to clean sweat and dust off for the whole unit. 

Especially please clean the flywheel, all the metal tube and parts to avoid rusting.

SEAT ADJUSTMENT:

Proper seat adjustment is critical to exercise 

efficiently and avoid the risk of injury. To 

determine whether the seat is properly, adjust 

seat on the exercise bike, place one pedal in 

the down position and enter your foot over the 

center of the pedal. Your leg should be only 

slightly bent. If you are stretching or your leg 

isn't extended sufficiently the seat should be 

adjusted as required.

After adjusting it is very important to make sure 

that the seat locking pin is securely locked into 

position.

1.  To adjust the height of seat simply turn the 

ADJUSTABLE KNOB loose. Then pull the 

knob and move the seat up or down to the 

desired height. (there are different seat 

height positions) .

2.  To adjust the seat position. Turn the fixing knob loose then pull the knob to move the 

seat to the desired position. After adjusting it is very important to make sure that the 

seat locking pin is securely locked into position.

HANDLEBAR ADJUSTMENT:

To adjust height of handlebar, simply turn 

the ADJUSTABLE KNOB loose then pull the 

knob and move handlebar post up or down 

to the desired height. There are 6 holes for 

adjustment.

Operating Instruction

Содержание Acute 3925













Отзывы: