Inputs & Outputs Cont’d
7.
Remote Control Jack
10 pin RJ-50 modular jack for connection to:
A.
RS-232 Cable (Included)
B.
JK Audio RIU-IP Remote Interface. See
page 11
.
C.
JK Audio Guest Module 1 Remote Keypad. See
page 11
.
D.
JK Audio Concierge Switch Core
8.
Remote Terminals
Screw terminals provide connections for a small speaker, remote LEDs,
tape recorder control, or console call control switches.
1.
Speaker (+)
Minimum 8 ohms, 1 watt max
2.
Speaker (-)
Use together with terminal 1
3.
Ring LED
Su4.3 VDC,
40 mA pulse signal during incoming ring cycles.
4.
Chassis Ground
5.
OH LED
Su4.3 VDC,
40 mA steady signal during an active call.
6.
Call (NO)
Pull this pin to ground momentarily to simulate
pressing the
<Call>
button.
7.
Drop (NO)
Pull this pin to ground momentarily to simulate
pressing the
<Drop>
button.
8.
Reserved
9.
Power Jack
Universal AC power input for 100-240 Volt, 50-60 Hz supply current.
Inputs & Outputs
5
Getting to Know Your innkeeper 1rx