5.5 Advanced Setting
Use the Advanced S
Advanced Setup includes items that are not available from the Basic Setup page,
such
nte
etup page to make detailed settings for the Wireless.
as Beacon I
rval, Control Tx Rates and Basic Data Rates.
Advanced wireless
BG Protection
n and Off.
Mode
Default: Auto. You can select the other options including O
The B/G protection technology is CTS-To-Self. It will try to reserve the
throughput for 11g clients from 11b clients connecting to the device as
AP mode.
Beacon Interval
Beacons are the packets sending by Access point to synchronize the
een
default and
recommended beacon interval is 100 milliseconds.
wireless network. The beacon interval is the time interval betw
beacons sending by this unit in AP or AP+WDS mode. The
Data Beacon Rate
(DTIM)
ents
transmitted immediately after the transmission of this beacon frame. You
can change the value from 1 to 255. The AP will check the buffered data
according to this value. For example, selecting “1” means to check the
buffered data at every beacon.
This is the Delivery Traffic Indication Map. It is used to alert the cli
that multicast and broadcast packets buffered at the AP will be
24
