JIYI Robotics CO. Ltd
17
2、Operation description
Step 1: Record A waypoint:
Hovering in GPS mode, switch the control stick of AB record to Gear 2. If
recording has finished, LED will flash yellow light for 2 seconds.
Step 2: Record B waypoint:
Making the aircraft to fly to the wanted place and hovering the aircraft .Switch
the control stick of AB record to Gear 3. If recording has finished, LED will flash
green light for 2 seconds.
Step 3: AB execution
Switch the control stick of AB mode execution.
Step 4: Select direction
Push the CH1 to select the direction. If you push CH1 to the left, it will move to
the left. If you push CH1 to the right, it will move to the right. Most important is that
it has to clean AB waypoints which recorded last time before you execute those steps.
Otherwise it will execute the AB points of operation settings which recorded last time.
Step 5: Interrupt AB operation
AB operation can be interrupted by the following ways: shift CH5 bar to an other
flight mode, switch control stick of AB operation to Gear 1, or switch to the
return-to-home.
During the execution, LED flash green light for four times.
During the execution, the CH3 and CH4 of remote controller can be used to
control the altitude and flight direction.
3、Correction function
AB points distance correction :
push pitch bar upwards or downwards, it can lengthened or shortened the AB
waypoint length.
