PAGE 18 of 24
Chapter 7
MAINTENANCE
7.1. Maintenance Schedule
Task
Frequency
Inspect cables and connectors
Inspect the Preamp cables for damage.
Have any damaged cable repaired by
a qualified person or replace the cable
assembly as necessary.
•
Inspect all connectors for damage
or moisture. Dry connectors before
using.
Every use
General cleaning
Ensure that the Preamp stays relatively
clean by wiping off any excess dirt or
other contaminants after every use.
Every use
7.2. Cleaning
General cleaning of components is important to keep your
system working well. All components that have no wiring
or cables are waterproof. Components can be washed with
warm water, dish soap and a medium bristle brush.
Before using the preamp, ensure all connectors are free of
water and moisture.
Inspect cables / connectors daily and as required, depending
on occurrence of damaging events.
NOTE:
All components with wiring, cables or electrical
connections are splash proof. However, these
components are
NOT
submersible.
NOTE:
Never use strong solvents or abrasive materials to
clean your preamp components.
