Mifare & ISO14443A & ISO14443B & ISO15693 Module
http://www.jinmuyu.com
Copyright © 2003-2011 Jinmuyu Electronics Co., LTD. All rights reserved.
13/35
Host sends:
0x04
0x1B
AFI
AFI enable
Checksum
AFI: 1 byte, AFI, 0~0xFF
AFI enable: 1 byte, 0: disable; 1: enable; other value: RFU
Module returns success:
0x02
0x1B
Checksum
Module returns failure:
0x02
0xE4
Checksum
5.2.10
Set
automatic detecting card interval time
Function:
set interval time between two automatic detecting card
Host sends:
0x03
0x1C
Interval Time
Checksum
Interval Time: 1 byte, 0x00 to 0xFF, unit is 10mS, 0x01 means 10mS.
Module returns success:
0x02
0x1C
Checksum
Module returns failure:
0x02
0xE3
Checksum
5.2.11
ISO14443A request cards
Function:
ISO14443A request cards, cards include Mifare and other ISO14443A cards. In
the return results, user can ascertain the length of serial number via the return data package
length, and also judge the card type by ATQA, and judge whether the card supports
ISO14443-4 by SAK. If automatic detecting card function was turned on, then this
command is read the result of automatic detecting card.
Host sends:
0x03
0x20
Mode
Checksum
Mode: 1 byte, 0: WUPA (request all); 1: REQA (Request not halted only); other value: RFU
Module returns success:
-
0x20
Data
Checksum
Data: 4, 7 or 10 bytes card serial 2 bytes ATQA + 1 byte SAK