Jinko JK5530C, Руководство пользователя

Страница: 19 / 24

14
Program control power test mode display interface
Set the output voltage: press the up and down keys to move the cursor to this option, enter the
voltage value you need to set through the numeric keyboard, and then press the corresponding
unit in the lower left corner of the screen to complete the setting;
The setting steps of limiting current and cut-off current are the same as above.
Meaning of each parameter:
Output voltage: After this parameter is set, the instrument will charge the battery with constant
current at the value set by this parameter.
Limit current: After this parameter is set, the instrument will charge the battery with constant
current at the value set by this parameter.
Cut-off current: After this parameter is set, the instrument will use this parameter to interrupt
the battery charging operation.
After setting all parameters, connect the battery under test and press the function key
corresponding to the OFF switch at the bottom right corner of the screen. The switch turns from
OFF to ON to start the battery charging operation; if you want to interrupt the charging operation
in the middle, press again Press this function key and the switch will turn from ON to OFF to
interrupt the battery charging operation. The charging capacity will be recorded in real time
during the test.