background image

 

4

Important Safety Guideline

 

Please read & understand prior to using boat 

 

To enhance the enjoyment of your boat and protect the safety of the 
operator using the product, 

ALWAYS STRICTLY OBSERVE 

the 

following important safety points. These should 

be read and 

understood prior to use

:

 

 

1.

 

WARNING: Boat designed for voyages in sheltered water only. 
Please only use the craft on small lakes, rivers and canals where 
conditions up to a wind force of level 4 and wave height up to 0.5m. 

 

2.

 

WARNING: This is not a life saving device. Use only under 
competent supervision. Never allow diving or jumping into this 
product. Never leave in or near the water when not in use. Never tow 
from any other craft. Adult assembly and operation required. 

 

3.

 

WARNING: Inflating the product’s chambers should be as the 
numbered sequence and do not over inflate. Excessive inflation of the 
product can cause the chambers to burst or cause damage to the 
welded seams. 

 

4.

 

WARNING: It is highly recommended that a user should take a 
boating safety course and get hands-on training from your boat dealer 
or local boating authorities. Review all safety requirements regularly. 
Never navigate alone. 

 

5.

 

WARNING: A Personal Flotation Device (PFD) is required for each 
passenger. It is especially important that children and non-swimmers 
wear a Personal Flotation Device at all times. Children and non-
swimmers need special instruction in the use of Personal Flotation 
Device. 

 

6.

 

WARNING: Use caution when stepping or climbing aboard the boat 
Step into the center of the boat for maximum stability. Distribute the 
weight of load and accessories evenly so that the boat sits level fore to 
aft and side to side. 

 

7.

 

WARNING: Do not use your boat if you suspect a puncture or leak. It 
may be unsafe. 

 

Содержание Z-ray I

















Отзывы: