10
a)
Inflation
:
Unscrew the Valve Cap
A
, Assemble the
Inflation
Adaptor
with the Inflating Mouth
B
,
Air pressure Meter
and the
air
pump
(Please see the below detailed illustration!).
After the inflation adapter is assembled completely, you can inflate
the boat by number sequence. Do not over inflate. After inflating,
screw the Valve Cap
A
in clockwise direction by hand.
Caution: Do
not over inflate or use high-pressure pump. The maximum
pressure for air chamber number (1) and (2) should be 0.250bar
(3.63PSI). And the maximum pressure for air chamber number
(3) should be 0.25bar (3.63PSI).
b)
Deflation
:
Remove the Valve Cap
A
, push down the Deflation
Button
C
and turn the valve in clockwise direction by 90
。
until it is
locked, release the valve and the air will flow out. If you want to stop
deflation, push down the Deflation Button
C
and turn it in counter-
clockwise direction by 90
。
. The deflation will stop when the valve is
released.
6. Oars Assembly:
Assemble the section of the oar by depressing the spring loaded pin and
inserting the sections of oar until the pins lock into their retaining holes.
