Selection Criteria for Baby Car Seat
Group 0+ Installation
This type baby car seat is applied to Group 0+/I/II/III and the
requirement for weight is form 0 to 36kg. It is suitable for
around 0 to12 year-old children. It
only can be suitable to use in the listed vehicles fitted 3
point/with retractor safety-belts, approved to ECE Regulation
No.16 or GB14166.
Different installation methods should be applied to children in
defferent group. Please follow the below standards to match the
right group installation.
Do not use any load bearing contact points other than those
Only can apply to the vehicle that has ISOFIX anchroages and 3-point safety belts.
7
8
Group Body
weight
Age
Children s
restraining
system
Installation
method
Direction
of
installation
Requirement for vehicles
0+
0-13kg
0-15
months
Rearward
Facing
Forward
Facing
Forward
Facing
Forward
Facing
5-point
harness
5-point
harness
vehicle s
3-point
seat belt
9months-
4years old
4-12
years old
4-12
years old
9-18kg
15-36kg
15-36kg
I
II+III
II+III
The vehicle equipped with
3-point belt, and cannot be
used if the vehicle seat is
equipped with only 2-point
belt.
The vehicle equipped with
3-point belt, and cannot be
used if the vehicle seat is
equipped with only 2-point
belt.
The vehicle equipped with
3-point belt, and cannot be
used if the vehicle seat is
equipped with only 2-point
belt.
The vehicle equipped with
ISOFIX anchroages, and
cannot be used if the vehicle
seat is equipped with only
2-point belt.
The vehicle equipped with
ISOFIX anchroages, and
cannot be used if the vehicle
seat is equipped with only
2-point belt.
’
’
vehicle s
3-point
seat belt
’
vehicle s
3-point
seat belt
’
vehicle s
3-point
seat belt
’
Forward
Facing
5-point
harness
9months-
4years old
9-18kg
I
vehicle s
3-point
seat belt
’
vehicle s
3-point
seat belt
’
vehicle s
3-point
seat belt
’
Attention
1. The installation for Group 0+ is rearward facing and is applied to children from 0 to 13kg.
2. This car seat for Group 0+ only has one sitting posture and it is level 4.
3. Baby car seat for Group 0+ can not be installed in the position which is equipped with airbag.
4. Please place the cushion for Group 0+ into the car seat when using rearward facing.
5. Important - If your child's weight is less than 9kg, you cannot make forward facing installation.
1
2
Step 1: As shown in figure 1, push the setting
knob and adjust the angle of seat to the level 4.
Step 2:
As shown in figure 2, placing the
safety car seat rearward in the car seat and
make it cling to car seat back.
Step 3: As shown in figure 3, the car safety belt passes through the hole of the safety seat
according to the blue direction. Put the car safety belt tongue into the car buckle. Pull horizontal
car belt tight and place oblique car belt into locking device, then pull belt tight again. Next,
put oblique car belt into guiding slot for Group 0+ and put remainder belt into seat belt
retractor. Finally, shake the safety seat to ensure whether car seat is already fixed.
Front
Opposite
3
click
Содержание UPGO
Страница 1: ...UPGO...
