Group I Installation
Group I Installation
Attention
1. The installation for Group I is forward facing and is applied to children from 9 to 18kg.
2. This car seat for Group I has three sitting postures and they are level 1/2/3.
3. After adjusting, make baby car seat cling to car seat back and strain safety belt.
Step 1:
As shown in figure 1, push the setting
knob and adjust the angle of seat to the right
level.
Step 1:
As shown in figure 1, push the setting
knob and adjust the angle of seat to the right
level.
Step 3:
As shown in figure 3, the car safety belt passes through the hole of the safety seat
according to the red direction. Put the car safety belt tongue into the car buckle. Place
horizontal car belt into limit hook tightly and place oblique car belt into Group 1 guiding slot,
then pull belt tight again, put remainder belt into seat belt retractor. Finally, shake the safety
seat to ensure it is already fixed.
Step 3:
As shown in figure 3, the car safety belt passes through the hole of the safety seat
according to the red direction. Put the car safety belt tongue into the car buckle. Place
horizontal car belt into limit hook tightly and place oblique car belt into Group 1 guiding slot,
then pull belt tight again, put remainder belt into seat belt retractor. Finally, shake the safety
seat to ensure it is already fixed.
Step 2:
As shown in figure 2, place the safety
car seat forward in the car seat and make it
cling to car seat back.
9
10
Step 3:
As shown in figure 3, before inserting the two ISOFIT connectors firmly into the ISOFIX
fixed point in the car seat, ISOFIT indication window will show red sign. Then, insert the two
ISOFIT connectors firmly into the ISOFIX fixed point in the car seat with a clicking noise on both
side. In the meantime, ISOFIT indication window will become green. In order to release ISOFIT
connectors, push the white button and pull the ISOFIX releasing button, the indication window
will become red.
1. UNIVERSAL I (9-18kg): 3-POINT BELT
1
2
3
click
Front
Opposite
click
2. SEMI-UNIVERSAL I (9-18kg): 3-POINT BELT
1
2
3
4
click
Step 2:
As shown in figure 2, rotate ISOFIT
connector outward, if you want to return
the connector, you can rotate it back.
Front
Opposite
Содержание UPGO
Страница 1: ...UPGO...
