Quick-Start Guide
Attach a Base Mount
(accessory)
Jigabot EX
Confidential & proprietary. Copyright 2022 Jigabot LLC, all rights reserved. [email protected] www.Jigabot.com Ph. 801-995-3680
The Base Mount accessory attaches to
the base of the EX, and provides sup-
port and stability. It does this by pro-
viding a larger platform for attaching to
tripods, brackets, jibs, dollies, carts, etc.
It mounts to the EX base using four M4
screws.
The Base Mount has two 3/8”-16
threaded holes as well as a 1/4”-20
threaded hole for mounting with up to
3 screws to a tripod, mounting bracket,
dolly, jig, etc.
The Base Mount is recommended
for any EX configuration where more
stability is desired. It is highly rec-
ommended when using (1) a Twofer
assembly, (2) when using a Top Mount
and mounting a camera over 3 pounds,
or (3) when mounting a laptop using
the Laptop Mount (and required Top
Mount).
Attach Base Mount to EX using four
M4 screws (included) and a 3mm hex
wrench (not included).
EX Twofer with Base Mount
EX Small Camera with Base Mount.
EX Large Camera with Base Mount
