Quick-Start Guide
Mount a Small Camera
Jigabot EX
Confidential & proprietary. Copyright 2022 Jigabot LLC, all rights reserved. [email protected] www.Jigabot.com Ph. 801-995-3680
Once you verify how to track with your Jigabot EX, and rather than mounting
an iPad, you can attach a small camera as follows:
First power OFF your Jigabot and DOTdriver, then do this setup:
1. Attach the Ball Head mount to the Jigabot EX
2. Attach the Camera to the Ball Head mount
Again power ON, then stand 6 feet in front of the Jigabot EX and move the
DOTs slowly from side to side. Congratulations, you’re tracking with a small
camera!
STEP 1
STEP 2
STEP 3
Attach the Ball Head Mount
(Screw in firmly. NOTE: tighten
Ball Head nobs first.)
Attach the camera to the
Ball Head Mount
(Screw in firmly, then readjust
the Ball Head as needed.)
Small camera:
a small camera is defined as less than 3 pounds, under 5 inch
-
es in length, and well balanced where it is attached to a Ball Head.
Level tripod
It is best practice to
make sure your tripod
is properly leveled so
that the Jigabot pans
in a precisely level
manner.
