-3-
Pre-Use Procedure
Before using your Jiffy Power Ice Drill to drill holes in ice, follow this
procedure to prepare for proper and correct use.
•
Carefully examine your Jiffy Power Ice Drill for hidden
shipping damage. If any external damage is observed to the
Jiffy Power Ice Drill, contact Feldmann Engineering.
•
Find, read and understand your Jiffy operators manual.
Contact your Jiffy dealer or Feldmann Engineering if you do
not understand any of the instructions in this manual.
•
Assemble the components of your Jiffy Power Ice Drill as
indicated in the Assembly of Drill section of this manual.
Leave the Jiffy Blade Protector on the drill assembly and
make certain it is securely fastened.
•
Using the supplied battery charger/maintainer, fully charge
the internal battery before the first use.
DO NOT RETURN your Jiffy STX PROII Lectric™ Drill TO THE
RETAILER THAT SOLD IT TO YOU. THEY ARE NOT AUTHORIZED
TO PROVIDE REPAIRS OR WARRANTY REPLACEMENT unless
they are an authorized Jiffy warranty station. If you have any
questions concerning the authorization of a service station, contact
Feldmann Engineering.
Jiffy E-Z Connect™ Collar
Connect drill assembly to powerhead by sliding E-Z Connect™ Collar
down and pulling clevis pin out. Then slide drill assembly onto output
shaft. Reinsert clevis pin through drill assembly and output shaft, then
slide E-Z Connect™ Collar up to lock pin in place.
Note: Do not remove clevis pin from collar tether.
Charging the Internal Battery (AGM ETX9, 12 Volt)
BATTERY DOC
®
The Ideal Portable Wallmount Battery Charger
For Your Jiffy® Lectric Model 55 Ice Drill
The 1Amp version, of the Wall-mount Battery Charger employs state of
the art electronics perfect for AGM (absorbed glass mat) 12-Volt
battery supplied with your Model 55 Ice Drill. The BATTERY DOC® is
a highly efficient, reliable battery charger that will safely charge and
maintain your battery at peak condition 24hours a day 365 days a year.
FEATURES
Small Lightweight construction.
UL 1236 approved for everyday use
Short Circuit protected with Automatic Recovery.
Three Color LED Charge Indicator
Electronically monitored Over Current Limiting
Two Stage Charging Constant Voltage (
Maintenance
)
Constant Current (
Charging
)
Universal AC input 100 - 240VAC, 50/60Hz
This manual contains important safety and operating
instructions for your battery charger.
1. Use of an attachment not recommended or sold by the battery
charger manufacturer may result in a risk of fire, electric shock, or
injury to persons.
2. To reduce risk of damage to electric plug and cord, pull by plug
rather than cord when disconnecting charger.
3. An extension cord should not be used unless absolutely necessary.
Use of improper extension cord could resultin a risk of fire and
electric shock. If extension cord must be used, make sure:
a. That pins on plug of extension cord are the same number, size,
and shape as those of plug on charger;
b. That extension cord is properly wired and in good electrical
condition; and
c. That wire size is large enough for ac ampere rating of charger.
4. Do not operate charger with damaged cord or plug - replace the
cord or plug immediately.
5. Do not operate charger if it has received a sharp blow, been
dropped, or otherwise damaged in any way; take it to a
qualified serviceman.
6. Do not disassemble charger; take it to a qualified serviceman when
service or repair is required. Incorrect reassembly
may result in a risk of electric shock or fire.
7. To reduce risk of electric shock, unplug charger from outlet before
attempting any maintenance or cleaning. Turning
off controls will not reduce this risk.
8. WARNING - RISK OF EXPLOSIVE GASES
a. WORKING IN VICINITY OF A LEAD-ACID BATTERY IS
DANGEROUS. BATTERIES GENERATE EXPLOSIVE GASES
DURING NORMAL BATTERY OPERATION. FOR THIS
REASON, IT IS OF UTMOST IMPORTANCE THAT EACH TIME
BEFORE USING YOUR CHARGER, YOU READ THIS MANUAL
AND FOLLOW THE INSTRUCTIONS EXACTLY.
b. To reduce risk of battery explosion, follow these instructions and
those published by battery manufacturer and
manufacturer of any equipment you intend to use in vicinity of
battery. Review cautionary marking on these
products and on engine.
9. PERSONAL PRECAUTIONS
a. Someone should be within range of your voice or close enough to
come to your aid when you work near a lead-acid
battery.
b. Have plenty of fresh water and soap nearby in case battery acid
contacts skin, clothing, or eyes.
c. Wear complete eye protection and clothing protection. Avoid
touching eyes while working near battery.
d. If battery acid contacts skin or clothing, wash immediately with
soap and water. If acid enters eye, immediately
flood eye with running cold water for at least 10 minutes and get
medical attention immediately.
e. NEVER smoke or allow a spark or flame in vicinity of battery or
engine.
f. Be extra cautious to reduce risk of dropping a metal tool onto
battery. It might spark or short-circuit battery or other
electrical part that may cause explosion.
g. Remove personal metal items such as rings, bracelets, necklaces,
and watches when working with a lead-acid
battery. A lead-acid battery can produce a short-circuit current
high enough to weld a ring or the like to metal,
causing a severe burn.
h. Use charger for charging a LEAD-ACID battery only. It is not
intended to supply power to a low voltage electrical
system other than in a starter-motor application. Do not use
battery charger for charging dry-cell batteries that are
commonly used with home appliances. These batteries may burst
and cause injury to persons and damage to
property.
i. NEVER charge a frozen battery.
10. CHARGER LOCATION
a. Locate charger as far away from battery as dc cables permit.
b. Never place charger directly above battery being charged; gases
from battery will corrode and damage charger.
c. Do not operate charger in a closed-in area or restrict ventilation in
any way.
d. Do not set a battery on top of charger.
