TPY
R
TPY
R
9
10
Only authorised personnel may install,maintain and inspect the
product and repair electrical components.Oberve the local safety
regulations.
4.4.2
During installation,maintenance and repair
WARNING
Always disconnect the energy supply to the product first,
before installation,maintenance and repairs,Secure this
disconnection
WARNING
Surfaces of a pump can be hot, after continuous operation.
WARNING
Make sure that no one can be near rotating components
when starting a pump.
WARNING
Handle a pump with dangerous liquids with the ut most
care. Avoid danger for persons or the environment when
repairing leakages,draining liquids and venting.It is strongly
recommended to place a relief barge under the pump.
WARNING
Immediately following completion of the work,all safety-relevant
and protective devices must be re-installed and/or re-activated.
WARNING
Please observe all instructions set out in the chapter "
Commissioning/start-up"before returning the product to
service
4.5
Environmental aspects
The products of TPY are designed to function in an environmentally
friendly way during their entire life.Therefore,when applicable,always
use biodegradable lubricants for maintenance.
4.5.1
General
ENVIRONMENTAL INSTRUCTION
Always act according to the laws,by-laws regulations
and instructions with respect to health,safety and the
environment.
ENVIRONMENTAL INSTRUCTION
Ask at the local government about the resue or the
environmentally friendly processing of discarded
materials.
4.5.2
Dismantling
Dismantle the product and dispose of it in an environmentally friendly
way.The owner is responsible for this
