Jidé s.a. – Rue des Meuneries 11 – B-4650 HERVE (Belgique) – Tél. +32 87 31.75.12 – Fax +32 87 31.75.11 –
Modul-ART (EN) June 2018
8
Chimney-sweeping
With a concern for safety and observance of the applicable legislation, you must have the
chimney swept at least once per year, in order to limit the tar deposits in the chimney.
It is an opportunity to check the condition of the flue and connection of the chimney. It is
recommended first carefully removing the baffle then repositioning it in its initial position.
Vacuum three or four times per year the residues above the baffle.
Spare parts
– Identification plate
The packaging contains the following items:
A poker;
A cold grip;
A glove;
A connection plate dia 100 mm (connection combustion air);
A plug plate and a fixing screw (to close the air inlet of the back in case of connection
from below);
A plug smoke outlet and a connection plate to the smoke pipe;
A paint spray for eventual retouching. Attention: before using the fireplace, make sure
to get the spray out and to keep it away with a minimum distance of 2 m.
On the packaging, an instruction manual and an identification plate.
Every Jidé stove is listed from their manufacture, following the indications stated on a plate
accompanying the present document, resuming in particular the power, the efficiency and
the CO-emissions of the stove.
This plate is to keep and will allow, if necessary, to distinguish your appliance in our files
(traceability). We advise you to paste it on the instruction manual or on your invoice.
