JHCTech PMI-3110 Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 39

JHCTech PMI-3110 Скачать руководство пользователя страница 39

User’s Manual

32

The PMI-3110 comes with a CD-ROM that contains all drivers and utilities that meet your needs.

4.1 Follow the sequence below to install the drivers:

Step 1 – Install Chipset Driver
Step 2 – Install VGA Driver
Step 3 – Install LAN Driver
Step 4 – Install Audio Driver

Please read instructions below for further detailed installations.

4.2 Installation:

Insert the PMI-3110 CD-ROM into the CD-ROM drive. And install the drivers from Step 1 to Step 4 in order.

Step 1 – Install Chipset Driver

1)Click on the Step 1 - Intel Chipset Software Installation Utility folder and double click on the

infinst_autol.exe

2)Follow the instructions that the window shows

3) The system will help you install the driver automatically

Step 2 – Install VGA Driver

1)Click on the Step 2 - Intel Graphics Media Accelerator Driver Production Version folder and select the

OS folder your system is

2)Double click on the Setup.exe file located in each OS folder
3)Follow the instructions that the window shows
4)The system will help you install the driver automatically

Step 3 –Install LAN Driver

1)Click on the Step 3 - Realtek folder and select the OS folder
2)Double click on the Setup.exe file
3)Follow the instructions that the window shows
4) The system will help you install the driver automatically

Step 4 –Install Audio Driver

1) Click on the Step 4 - Realtek HD Audio Codec folder and select the OS folder your system is
2)Double click on Setup.exe file located in each OS folder
3)Follow the instructions that the window shows
4)The system will help you install the driver automatically

«
...
37
38
39

Содержание PMI-3110








































Отзывы:

Нет отзывов