JHCTech PMI-3110 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 39

JHCTech PMI-3110 Скачать руководство пользователя страница 3

User’s Manual

I

Copyright

The documentation and  the software included with  this product  are  copy- righted 2006 by ShenZhen JHC
Technology Co., Ltd. All rights are reserved. ShenZhen JHC Technology Co., Ltd. reserves the right to make
improvements in  the products  described in  this manual  at  any time without notice. No part of this  manual
may be reproduced, copied, translated or transmitted in any form or by any means without the prior written
permission  of ShenZhen JHC Technology Co.,  Ltd.  Information  provided in  this manual  is  intended to  be
accurate and reliable. However, ShenZhen JHC Technology Co., Ltd.assumes no responsibility for its use,
nor for any infringements of the rights of third parties, which may result from its use.

Acknowledgements

Award is a trademark of Award Software International, Inc.
IBM, PC/AT, PS/2 and VGA are trademarks of International Business Machines Corporation.
Intel and Pentium are trademarks of Intel Corporation.
Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.
RTL is a trademark of Realtek Semi-Conductor Co., Ltd.
All other product names or trademarks are properties of their respective owners.
For more information on this and other JHC products, please visit our websites at :

http://www.jhctechnology.cn

«
1
2
3
4
5
...
»

Содержание PMI-3110








































Отзывы:

Нет отзывов