JHCTech ALAD-K1520T Скачать руководство пользователя страница 68

Страница: 68 / 73

User’s Manual

The ALAD-K1520T comes with a CD-ROM that contains all drivers and utilities that meet your needs.

4.1 Follow the sequence below to install the drivers:

Step 1 – Install Intel Chipset Software Installation Utility

Step 2 – Install Intel Graphics Drivers

Step 3 – Install Audio Drivers

Step 4 – Install LAN Driver

Step 5– Install Kernel Mode Driver Framework (For Windows 7 only)

Step 6– Install Intel Trusted Execution Engine Driver

Step 7– Install HW Utility

Step 8– Install Intel USB 3.0 Drivers (For Windows 7 and Windows 8.1)

Step 9– Install IO Driver

Please read instructions below for further detailed installations.

4.2 Installation:

Insert the ALAD-K1520T CD-ROM into the CD-ROM drive. And install the drivers from Step 1 to Step 4 in

order.

Step 1 –Install Intel Chipset Software Installation Utility

1)Setup is ready to install the utility. Click Next.

2)Read the license agreement then click Yes.

3) Go through the readme document for more installation tips then click Next.

4) Click Finish to exit setup.

Step 2 – Install Intel HD Graphics Drivers

Setup is now ready to install the graphics driver.Click Next.

Read the license agreement then click Yes.

Содержание ALAD-K1520T










































































Результаты поиска

Содержание ALAD-K1520T

Отзывы:

Похожие инструкции для ALAD-K1520T

Бренды по названию

Популярные бренды

JHCTech ALAD-K1520T, Руководство пользователя

Результаты поиска

Содержание ALAD-K1520T

Отзывы:

Похожие инструкции для ALAD-K1520T

Бренды по названию

Популярные бренды