JHCTech ALAD-K1520T Скачать руководство пользователя страница 3

Страница: 3 / 73

Copyright

The documentation and the software included with this product are copy- righted 2016 by Shenzhen JHC

Technology Co., Ltd. All rights are reserved. Shenzhen JHC Technology Co., Ltd. reserves the right to make

improvements in the products described in this manual at any time without notice. No part of this manual

may be reproduced, copied, translated or transmitted in any form or by any means without the prior written

permission of Shenzhen JHC Technology Co., Ltd. Information provided in this manual is intended to be

accurate and reliable. However, Shenzhen JHC Technology Co., Ltd.assumes no responsibility for its use,

nor for any infringements of the rights of third parties, which may result from its use.

Acknowledgements

Award is a trademark of Award Software International, Inc.

IBM, PC/AT, PS/2 and VGA are trademarks of International Business Machines Corporation.

Intel and Pentium are trademarks of Intel Corporation.

Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.

RTL is a trademark of Realtek Semi-Conductor Co., Ltd.

All other product names or trademarks are properties of their respective owners.

For more information on this and other JHC products, please visit our websites at:

http://www.jhctech.com.cn

Содержание ALAD-K1520T










































































Результаты поиска

Содержание ALAD-K1520T

Отзывы:

Похожие инструкции для ALAD-K1520T

Бренды по названию

Популярные бренды

JHCTech ALAD-K1520T, Руководство пользователя

Результаты поиска

Содержание ALAD-K1520T

Отзывы:

Похожие инструкции для ALAD-K1520T

Бренды по названию

Популярные бренды