JHCTech ALAD-K1220T Скачать руководство пользователя страница 66

Страница: 66 / 71

User’s Manual

The ALAD-K1220T comes with a CD-ROM that contains all drivers and utilities that meet your needs.

4.1 Follow the sequence below to install the drivers:

Step 1 – Install Intel Chipset Software Installation Utility

Step 2 – Install Intel Graphics Drivers

Step 3 – Install Audio Drivers

Step 4 – Install LAN Driver

Step 5– Install Kernel Mode Driver Framework (For Windows 7 only)

Step 6– Install Intel Trusted Execution Engine Driver

Step 7– Install HW Utility

Step 8– Install Intel USB 3.0 Drivers (For Windows 7 and Windows 8.1)

Step 9– Install IO Driver

Please read instructions below for further detailed installations.

4.2 Installation:

Insert the ALAD-K1220T CD-ROM into the CD-ROM drive. And install the drivers from Step 1 to Step 4 in

order.

Step 1 –Install Intel Chipset Software Installation Utility

1)Setup is ready to install the utility. Click Next.

2)Read the license agreement then click Yes.

3) Go through the readme document for more installation tips then click Next.

4) Click Finish to exit setup.

Step 2 – Install Intel HD Graphics Drivers

Setup is now ready to install the graphics driver.Click Next.

Read the license agreement then click Yes.

Содержание ALAD-K1220T








































































Результаты поиска

Содержание ALAD-K1220T

Отзывы:

Похожие инструкции для ALAD-K1220T

Бренды по названию

Популярные бренды

JHCTech ALAD-K1220T, Руководство пользователя

Результаты поиска

Содержание ALAD-K1220T

Отзывы:

Похожие инструкции для ALAD-K1220T

Бренды по названию

Популярные бренды