JHCTech ALAD-K1220T, Руководство пользователя

Страница: 22 / 71

User’s Manual
15
Figure 2.14 Ethernet Connector
Table 2.1: RJ-45 Connector pin assignments
Pin 10/100/1000BaseT Signal Name
1
TX+(10/100), BI_DA+(GHz)
2
TX-(10/100), BI_DA-(GHz)
3
RX+(10/100), BI_DB+(GHz)
4
BI_DC+(GHz)
5
BI_DC-(GHz)
6
RX-(10/100), BI_DB-(GHz)
7
BI_DD+(GHz)
8
BI_DD-(GHz)
2.4.2 Power Input Connector (DC-IN)
This 3-pin 3.81mm connector provides maximum of 60W power and is considered a low power solution.
Connect a DC power cord to this connector . Use a power adapter within 9 ~36V DC output voltage. Using
a voltage out of the range 9 ~36V may fail to boot the system or cause damage to the system board.
Figure 2.15 3-pin 3.81 Connector
Table 2.2: Power Connector Pin Assignments
Pin Signal Name
1 +9~36V
2 NC
3 GND
2.4.3 Power SW button Connector
The power button is a round button which is used to power on or power off the device.