JHCTech ALAD-A1201T Скачать руководство пользователя страница 61 | Manualshive

Страница: 61 / 65

JHCTech ALAD-A1201T Скачать руководство пользователя страница 61

User’s Manual

54

The ALAD-A1201T comes with a CD-ROM that contains all drivers and utilities that meet your needs.

4.1 Follow the sequence below to install the drivers:

Step 1 – Install Intel Chipset Software Installation Utility
Step 2 – Install Intel Graphics Drivers
Step 3 – Install Audio Drivers
Step 4 – Install LAN Driver
Step 5– Install Kernel Mode Driver Framework (For Windows 7 only)
Step 6– Install Intel Trusted Execution Engine Driver
Step 7– Install HW Utility
Step 8– Install Intel USB 3.0 Drivers (For Windows 7 and Windows 8.1)
Step 9– Install IO Driver

Please read instructions below for further detailed installations.

4.2 Installation:

Insert the ALAD-A1201T CD-ROM into the CD-ROM drive. And install the drivers from Step 1 to Step 4 in
order.

Step 1 –Install Intel Chipset Software Installation Utility

1)Setup is ready to install the utility. Click Next.

2)Read the license agreement then click Yes.

3) Go through the readme document for more installation tips then click Next.

4) Click Finish to exit setup.

Step 2 – Install Intel HD Graphics Drivers

1)

Setup is now ready to install the graphics driver.Click Next.

2)

Read the license agreement then click Yes.

3)Go through the readme document for system requirements and installation tips then click Next.

4)Setup is now installing the driver. Click Next to continue.

5)Click ―Yes, I want to restart this computer now‖ then click Finish.

Step 3 –Install Audio Drivers

1)

Setup is ready to install the driver. Click Next.

2)Click

“

Yes, I want to restart my computer now

”

then click Finish.

«
...
59
60
61
62
63
...
»

Содержание ALAD-A1201T


































































Отзывы:

Нет отзывов