ENGLISH
26
CLOCK FUNCTIONS
Setting the time
• The time can only be set when in standby mode (radio turned off but still connected to the power supply).
• Press the
TIME SET/MEMORY
button (8). The hour will blink in the display (11).
• Then press the
DOWN
(3) or
UP
(2) button to set the hour and confirm the selection with the
TIME SET/
MEMORY
button. Set the minutes using the same procedure.
• After the minutes have been set and saved, the time will automatically be displayed.
If you do not press any button for approx. 5 seconds, then the display changes back to whatever was
previously shown. You must then press the
TIME SET/MEMORY
button again.
Displaying the time
• After you have turned on the radio with the
ON/OFF
button (6), the time is no longer shown in the
display (11).
• To see the time, press the
MODE
button (10). The time will be shown in the display for approx. 4 seconds.
Then the display changes back to what was previously shown.
Waking up with the radio
• You can set the alarm so that when it is activated, the radio turns on.
• The wake up time can only be set in standby mode (radio turned off but still connected to the power supply).
• Press the
SLEEP/WAKE
button (5). The radio symbol will be shown
blinking in the display (11) and the hour will also blink on
0
(fig. 5).
• Press the
DOWN
(3) or
UP
(2) button to set the hour and confirm the
selection with the
SLEEP/WAKE
button. Set the minutes using the same
procedure.
• After the minutes have been set and saved, the time and the radio
symbol will be automatically displayed.
Fig. 5
• To turn off the alarm, press the
SLEEP/WAKE
button. The symbol disappears from the display.
If you do not press any button for approx. 5 seconds, then the display changes back to whatever was
previously shown. You must then press the
SLEEP/WAKE
button again.
JGC-UR-210-IM-DE-EN-V3.indb 26
03/12/2009 10:41 AM
