JGaurora A-8, Руководство по эксплуатации

Страница: 49 / 49

---3D printer user manual
- 48 -
Maintenance
Important Lists
How to operate the printer at the right way:
a.
Pls refer to the USER MANUAL before printing, do preparation of hot bed
adjustment first.
b. When finished printing, the filament should keep sealing, avoid moisture.
c. Preheat the extruder first when do printing next time, let extruder
auto-push filament for a while.
d. Machine should do some regular maintenance, drop some lubricating oil
on thread rod, polished rod and bearings to avoid fatigue wear.
e. Do not let the fan and air-condition blow to the hot bed when printing.
f. Keep the working condition at “Temp:10-30
℃，
Humidity:20-70%”.
All products should be inspected and test strictly over 48 hours, you can enjoy
your printing work freely.
Contact information of maintenance service
Contact information:
Tel: 0086-0755-66607459
QQ: 2383743754( Miss Song)
Skype: teresa-jiguang
E-mail:
2383743754@qq.com or jgaurora@zgew3d.com
Add: The Fifth Floor, Jihe Building, Chilingtou County, Bulong Road, Longhua,
Shenzhen, China.