JGaurora A-8, Руководство по эксплуатации

Страница: 4 / 49

---3D printer user manual
- 3 -
Security Considerations
Do not touch the extruder and hot bed, when machine
working, temp. of extruder will be about 200 centigrade, hot bed
could be 110 centigrade.
Do not put your hand into machine when printing, in case of
crushing.
The power supply use 110V-220V~50HZ alternating current,
the tripod socket must be grounded, don’t add another power, in case
of fire or electric shock.
We suggest you wear safety goggles when tear off supports
of models.
Put the machine at a drafty room, some smells from the
material may let you uncomfortable, especially ABS material.
Pls take consideration of the following below, in case of damage and
danger.