CCA METER FUNCTION (Cold Start Current Meter)
To perform CCA measurement, simultaneously press the SELECTOR
READING and
SELECTOR MODE keys.
When the
CCA METER function
is activated, the STORM Source disconnects from the AC
power grid, disconnects the fan, and starts the battery test. When the display displays the CCA-
BATXXX information, press the BATTERY SELECTOR switch to select the battery capacity to be
tested. During this process, the display displays the word CCA flashing. After 10 seconds, the display
displays the CCAXXX information, which can range between 20A and 999A, with the CCA value
obtained in the reading and RiXXXX (internal battery resistance) in mΩ the percentage of battery
charge is displayed in comparison to a new battery (selected at the beginning of the test).
This function can be used to test a battery bank that is within the maximum source
specifications (for parallel connection, add CCA of each battery) however, it is more indicated that
the test is done on individual batteries.
For proper operation, use 50mm2 x 30cm cables for 200A and 150A sources; 35mm2 x
30cm for 120A sources; and 16mm2 x 30cm for 70A, 60A and 40A sources; and make sure that the
supply terminals are correct ly so in the terminals to the battery terminals.
BATTERY CHECK-UP FUNCTION (Cumulative Charge Meter)
To perform a
BATTERY CHECK-UP
, proceed:
The battery must be discharged to approximately 11V voltage.
Turn on the source, press the key
SELECTOR READING
until the mode
BATTERY CHECK-UP
is active (
VOLTAGE
and
CURRENT LEDS ON
). To reset the counter, hold down the key
SELECTOR
READING
by 5 Seconds.
8
PAINEL DE CONTROLE
TENSÃO
BATERIA
AUTO
SCI
CARGA
LENTA
TENSÃO
SAÍDA
BATERIA
CARREGADA
2. ABSORÇÃO
3. EQUALIZAÇÃO
SELETOR
MODO
SELETOR
LEITURA
TENSÃO
CORRENTE
1. ELEVAÇÃO
CARGA LENTA
CHECK-UP DA BATERIA
SELETOR
MEDIDOR
CCA - Ri m
PAINEL DE CONTROLE
TENSÃO
BATERIA
AUTO
SCI
CARGA
LENTA
TENSÃO
SAÍDA
BATERIA
CARREGADA
2. ABSORÇÃO
3. EQUALIZAÇÃO
SELETOR
MODO
SELETOR
LEITURA
TENSÃO
CORRENTE
1. ELEVAÇÃO
CARGA LENTA
CHECK-UP DA BATERIA
SELETOR
MEDIDOR
CCA - Ri m
CONTROL PANEL
VOLTAGE
BATTERY
AUTO
ICS
SLOW
CHARGE
OUTPUT
VOLTAGE
CHARGED
BATTERY
2.ABSORPTION
3.EQUALIZATION
MODE
SELECTOR
READING
SELECTOR
VOLTAGE
AMPERAGE
1.ELEVATION
SLOW CHARGE
PHASES
BATTERY CHECK-UP
SELECTOR
super-x
METER
CCA - Ri m
1
1
CONTROL PANEL
VOLTAGE
BATTERY
AUTO
ICS
SLOW
CHARGE
OUTPUT
VOLTAGE
CHARGED
BATTERY
2.ABSORPTION
3.EQUALIZATION
MODE
SELECTOR
READING
SELECTOR
VOLTAGE
AMPERAGE
1.ELEVATION
SLOW CHARGE
PHASES
BATTERY CHECK-UP
SELECTOR
super-x
METER
CCA - Ri m
1
X-LINE SOURCES AND CHARGERS - INSTRUCTION MANUAL
