19
TECHNICAL SPECIFICATIONS
RECEIVER
UNIT
Operating voltage: 9 to 16 V
Stand-by consumption: 13 mA
Polarity reversal protection: YES
If you have any questions, please contact our technical support:
[email protected] and [email protected]
+55 (31) 2533-6100
TRANSMITTER
UNIT
Battery model: A 23 - 12 V
Operating frequency: 433.92 MHz
Polarity reversal protection: NO
Radiated power (3 meters): 0.808 mW
Modulation
The ACQUA 1200 remote control is splash and water resistant, and has
been tested under laboratory controlled conditions with the submerged
transmitter unit at 10 cm depth for 5 minutes.
The resistance is not a permanent condition and can decrease over
time. Do not replace the battery with the ACQUA 1200 wet remote
control. Damages arising from contact with liquids are not included in
the warranty.
"This equipment operates on a secondary basis,
that is, it is not entitled to protection against
harmful interference, even from stations of the
same type, and cannot cause interference to
systems operating on a primary basis.”
01260-14-04318
CONTROL ACQUA 1200 - INSTRUCTION MANUAL
APPROVED PRODUCT
