JF 15D, Руководство по эксплуатации и техническому обслуживанию

Страница: 7 / 28

7
TECHNICAL MANUAL OF OPERATION - JF 15D
- If you notice any abnormal operation: vibrations, strange noises etc., immediately turn off the
machine. Check and eliminate the cause, before turning it on again.
- Moveable parts and components, due to inertia, they continue moving after the machine
stops operating. Before touching any part, disconnect the actuation source, look, and listen to
see if there is any evidence of movement. Only touch a part if you are sure if is motionless.
Always pay close attention!
- Before starting the electrical installation of the motor, make sure the local electricity is turned
off.
- The installation of electric motors must be performed by a qualified electrician. The
dimensioning of the cables and the utilization of starting devices must comply with currently
applicable safety standards.
- There must be enough space around the machine for circulation to keep it permanently
unobstructed and to allow for safe movement of the operator and the product being
processed.
- We recommend installing the machine in a flat location, free of oil, grease, holes, protected
from the sun and rain. Contact with water increases the hazard of electrical shock.
- Never operate the machine inside closed locations and without ventilation, the gases
released from the motor (diesel or gasoline) are toxic and highly harmful to health.
- Be prepared in case of an accident. Keep a first-aid kit on hand and easily accessible. Know
how to use it.
- Do not use this equipment for applications which are not mentioned and considered
unacceptable in the manual and not authorized by the manufacturer. Making adaptations or
using after-market parts can compromise the operation, be dangerous to the safety of the
operator, and invalidate the guarantee.
- Follow the safety recommendations and pay attention. Lack of attention while operating can
cause accidents.
English
24
Polea del motor (accionamiento con motor eléctrico)
Polea de la máquina (accionamiento con motores)
Correas (accionamiento con motor eléctrico)
Poleas y correas (accionamiento con tractor)
Correas (accionamiento con motor/diesel/gasolina)
JF 15D
ALTA ROTACIÓN (3500 RPM) BAIXA ROTAÇÃO (1750 RPM)
Ø Polea del
Motor (mm) Numero de
canales
Ø Polea del
Motor (mm) Numero de
canales
115 3B 215 3B
MOTORES TRACTOR
Ø Polea VB (mm) Número de Canales
B (c/ volante)
Ø Polea VA (mm) Número de Canales
(s/ volante)
120 4 85 6
ALTA ROTACIÓN (3500 RPM) BAJA ROTACIÓN (1750 RPM)
Correa Cantidad Correa Cantidad
B-81 3 B-85 3 Base
Caballete Prolongado* B-58 3 B-58 3
Polea Ø (mm)
Correas
Máquina
Accesorio
Tipo Cantidad
JF 15D 85
480
A-80 6
TIPO Cantidade c/ Volante
JF 15D B-81 3