JF-Stoll FC 855, Инструкция по эксплуатации

Страница: 35 / 64

4. ADJUSTMENTS
ROTOR AND ROLLER SECTION
P
R
11
-0
2
3
0
A
F
X
D D C
Fig. 4-4
Fig. 4-4 The distance A between the blades of the rotor and the shearbar must be checked
regularly with the delivered gauge (distance measuring device). You should aim at a
distance of 0.5 mm. If it is necessary to adjust the distance, loosen the 2 bearing
housings B and adjust with the screws C. When the distance has been checked, the
bolts D of the bearing housings are tightened with a torque wrench to 27 kgm (270
Nm).
The machine is equipped with a scraper for the smooth roller E. The scraper is
mounted together with the reversible shearbar just mentioned.
When mounting the scraper place it as close as possible not damaging the smooth
roller E, the distance X must be between 0.25 and 0.5 mm, then tighten the bolts F
with a torque wrench to 10-12 kgm (100-120 Nm).
P
R12-0458
A
B
Fig. 4-5
Fig. 4-5 The scraper is dismounted by removing the screws F (on fig. 4-4), which also secure
the shearbar, after which scraper and shearbar can be pulled out of the opening A in
the rotor housing. The spring B for the serrated roller must be loosened or
dismounted to get enough space.
If the shearbar has been worn it can be reversed for a new sharp edge.
PIGB-138X-02 FC 855 0410
- 35 -