3
I. Description of the apparatus
Distillation apparatus for producing of distilled water TYPE DP 4000 is identified for
preparing of smaller amounts of distilled water.
By way of this apparatus it is possible to prepare approximately 4 litre of distilled water at one
hour.
Apparatus is put together from two main parts - glass part and electrical part. Both parts are
connected with plastic flange
In upper part of glass part is cooling coil. This upper part is partitioned off the lower part with
glass partition. Boiling of tap water proceeds in the lower part of the glass part. Vapour
comes through the tube which is connected to the centre of partition to upper part where is
cooled and distilled water is drained of the distillation apparatus through the nozzle which is
situated above glass partition..
II. Technical Data
Power consumption
Rated current
Electrical protection – tube
fuse 5 x 20 F 8 A
Mains voltage
Distilled output:
Conductivity of distillate:
referred to 25 °C
Distilled temperature
Cooling water consumption
Dimensions of the apparatus
W approx.
A approx.
A
V/Hz
l/h
µ
S/cm
°C
l/h
mm
∼
3100
15
1
230/50
∼
4
1,5 – 2,5
95
~50
190 x 190 x 600
III. General instructions and safety regulations
1. To avoid possible hazards pay good attention to the general instructions and safety
regulations.
2. When you operate with this apparatus wear protective clothing, goggles and protective
gloves.
3. Read and follow Operating manual carefully step by step.
4. Every user must be acquainted with this Operating manual and keep it within reach at all
times.
5. The area in which the apparatus is to be used must conform to the appropriate electrical
regulations. Connect the apparatus only to the earthen plugs and sockets.
6. Set up the apparatus on solid, flat surface only.
7. Use the apparatus in a dry environment only; do not use it in a potentially explosive
atmosphere.
