41
Device Reset Time-out
Use this item to set USB mass storage device start unit command time-out.
The optional settings are: [10 sec]; [20 sec]; [30 sec]; [40 sec].
Device Power-up Delay
Use this item to set maximum time the device will take before it properly reports
itself to the host controller.
The optional settings: [Auto]; [Manual].
‘
Auto
’
uses default value: for a root port it is 100 ms, for a hub port the delay is
taken from hub descriptor.
Select [Manual] you can set value for the following sub-item:
‘
Device Power-up
Delay in Seconds
’
.
Device Power-up Delay in Seconds
The delay range is from [1] to [40] seconds, in one second increments.
►
Realtek PCIe GBE Family Controller(MAC:XX:XX:XX:XX:XX:XX)/Realtek
PCIe GBE Family Controller(MAC:XX:XX:XX:XX:XX:XX)
These items show current network brief information.
*Note:
The secondary Realtek PCIe GBE Family Controller shows up based on
actual configuration of the actual product.
