31
ACPI Sleep State
Use this item to select the highest ACPI sleep state the system will enter when the
suspend button is pressed.
The optional settings are: [Suspend Disabled]; [S3 (Suspend to RAM)].
4
Super I/O Configuration
Press [Enter] to make settings for the following sub-items:
Super IO Configuration
►
Serial Port 1 Configuration
Press [Enter] to make settings for the following items:
Serial Port 1 Configuration
Serial Port
Use this item to enable or disable serial port (COM).
The optional settings are: [Disabled]; [Enabled].
Change Settings
Use this item to select an optimal setting for super IO device.
Changing setting
may conflict with system resources.
The optional settings are: [Auto]; [IO=3F8h; IRQ=4]; [IO=2F8h; IRQ=3]; [IO=3E8h;
IRQ=4]; [IO=2E8h; IRQ=3].
Transmission Mode Select (*Optional)
The optional settings are: [RS422]; [RS232]; [RS485].
*Note:
‘
Transmission Mode Select
’
is only optional for NF695HV series.
Mode Speed Select (*Optional)
The optional settings are: [RS232/RS422/RS485=250kbps]; [RS232=1Mbps,
RS422/RS485=10Mbps].
*Note:
‘
Mode Speed Select
’
is only optional for NF695HV series.
►
Serial Port 2 Configuration/ Serial Port 3 Configuration / Serial Port 4
Configuration/ Serial Port 5 Configuration/ Serial Port 6 Configuration/ Serial
Port 7 Configuration/ Serial Port 8 Configuration / Serial Port 9
Configuration/ Serial Port 10 Configuration (*Optional)
Press [Enter] to make settings for the following items:
