10
JP4 (2-pin): GPIO/80 PORT MODE Select Pitch2.0mm
Pin1
Pin1
1-2 Closed: GPIO= GPIO Port (Default).
.
1-2 Open: GPIO= 80 Port;
2-2 Connector and Headers
2-2-1 Rear I/O Back Panel Connectors
*Refer to Page-2 Rear IO Diagram
Icon
Name
Function
Serial Port
Mainly for user to connect external MODEM or other
devices that supports Serial Communications Interface.
HDMI 2.0 Port
To connect display device that support HDMI specification.
Display 1.4 Port
To the system to corresponding display device with
compatible display port cable.
RJ-45 LAN Port
This connector is standard RJ-45 LAN jack for Network
connection. These two RJ-45 LAN port from
UL1
and
UL2
support 1.0GbE transfer rate.
RJ-45 LAN Port
This connector is standard RJ-45 LAN jack for Network
connection. These two RJ-45 LAN port from
UL3
support
2.5GbE transfer rate. (
MM10-Q6700/6702
only)
(
*Note
: 2.5Gbps is only supported with CAT5e UTP
cable
).
USB 3.2 (Gen.2)
Port
To connect USB keyboard, mouse or other devices
compatible with USB 3.2(Gen.2) specification. Ports
support up to 10Gbps data transfer rate.
USB 2.0 Port
To connect USB keyboard, mouse or other devices
compatible with USB 2.0 specification. Ports support up to
480Mbps data transfer rate.
JP4
