33
Transmission Mode Select
The optional settings: [RS422]; [RS232]; [RS485].
Mode Speed Select
Use this item to select RS232/RS422/RS485 Speed.
The
optional
settings:
[RS232/RS422/RS485=250Kbps];
[RS232=1Mbps,
RS422/RS485=10Mbps].
►
Serial Port 2 Configuration
Press [Enter] to make settings for the following items:
Serial Port 2 Configuration
Serial Port
Use this item to enable or disable Serial Port (COM).
The optional settings: [Disabled]; [Enabled].
When set as
[Enabled]
, user can make further settings in the following items:
Device Settings
Change Settings
Use this item to select an optimal setting for Super IO Device.
The optional settings: [Auto]; [IO=3F8h; IRQ=4;]; [IO=2F8h; IRQ=3;]; [IO=3E8h;
IRQ=4;]; [IO=2E8h; IRQ=3;];.
ERP Support
Use this item to select Energy-Related Products function. This item should be set
as [Disabled] if you wish to have all active wake-up functions.
The optional settings: [Disabled]; [Enable].
Case Open Detect
Use this item to detect case has already open or not, show message in POST.
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], system will detect if COPEN has been short or not (refer
to Page 14); if Pin 7&8 of JPCLR is short, system will show Case Open Message
during POST.
WatchDog Reset Timer
Use this item to enable or disable WDT reset function.
