34
The optional settings: [Disabled]; [Enable].
When set as
[Enabled]
, the following sub-items shall appear:
WatchDog Reset Timer Value
User can select a value in the ran
ge of [10] to [255] seconds when ‘WatchDog
Reset Timer Unit’ set as [Sec]; or in the range of [1] to [255] minutes when
‘WatchDog Reset Timer Unit’ set as [Min].
WatchDog Reset Timer Unit
The optional settings: [Sec.]; [Min.].
WatchDog Wake-up Timer
Use this item to enable or disable WDT wake-up function.
The optional settings: [Disabled]; [Enable].
When set as
[Enabled]
, the following sub-items shall appear:
WatchDog Wake-up Timer Value
User can select a value in the range of [10] to [4095] seconds when
‘WatchDog
Reset Timer Unit’ set as [Sec]; or in the range of [1] to [4095] minutes when
‘WatchDog Reset Timer Unit’ set as [Min].
WatchDog Wake-up Timer Unit
The optional settings: [Sec.]; [Min.].
ATX Power Emulate AT Power
This item support Emulate AT power function, MB power On/Off control by power
supply. Use needs to select ‘AT or ATX Mode’ on MB jumper at first (AT-MODE
setting Pin 1&2 of for ATX Mode & Pin 2&3 of AT Mode Select)
Serial Port Console Redirection
COM1
Console Redirection
Use this item to enable or disable Console Redirection.
The optional settings: [Disabled]; [Enabled].
When set as
[Enabled]
, user can make further settings in the following items:
Console Redirection Settings
The settings specify how the host computer and the remote computer (which the
user is using) will exchange data. Both computers should have the same or
