22
Use this item to enable or disable CPU Power Management. This item allows
CPU to go to C states when it’s not 100% utilized.
The optional settings: [Disabled]; [Enabled].
Turbo Mode
Use this item to enable or disable processor Turbo Mode (requires Intel Speed
Step or Intel Speed Shift to be available and enabled).
The optional settings: [Disabled]; [Enabled].
SATA Configuration
Press [Enter] to make settings for the following sub-items:
SATA Controller(s)
Use this item to enable or disable SATA device.
The optional settings: [Enabled]; [Disabled].
When set as [Enabled], user can make more settings for the following sub-items:
SATA Mode Selection
Use this item to determine how SATA controller(s) operate.
The optional settings: [AHCI]; [RAID]
M.2
Port
Use this item to enable or disable SATA Port
The optional settings: [Disabled]; [Enabled]
SATA Port 1/ SATA Port 2/ SATA 3/ SATA 4
Port
Use this item to enable or disable each SATA port.
The optional settings: [Disabled]; [Enabled].
Hot Plug
Use this item to designate this port as Hot Pluggable.
The optional settings: [Disabled]; [Enabled].
PCH-FW Configuration
Press [Enter] to view current Management Engine Technology Parameters and
make more settings for the following sub-item:
TPM Device Selection
Use this item to select TPM device: PTT or dTPM. When set as PTT, user can
enable PTT in SkuMgr. When set as dTPM 1.2, user can disable PTT in
SkuMgr.
The optional settings: [dTPM]; [PTT].
Warning!
PTT/dTPM will be disabled and all data saved on it will be lost.
►
Firmware Update Configuration
Press [Enter] to go to ‘
ME FW Image Re-Flash
’ to enable or disable ME FW
Image Re-Flash function.
ME FW Image RE-Flash
Use this item to enable or disable ME FW Image Re-Flash function.
The optional settings: [Disabled]; [Enabled].
* In the case that user needs to update ME firmware, user should set
‘ME FW
